View 1EGG1C-1_7345680.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

corcom emi/rfi filter product overview te connectivity ofers over 300 solutions for emi/rfi problems associated with susceptibility, as well as compliance with international emissions standards. corcom flters are available in a wide range of single and 3-phase designs as well as iec inlet and power entry modules which can combine several functions to reduce cost, space and labor. solutions are also available for dc applications and applications requiring extremely high performance with feedthrough flters and capacitors for a wide range of applications.
corcom.com corcom filter products te connectivity series performance approvals features electrical parameters max. voltage current ratings leakage current each line to ground @ 120vac 60hz / 250vac 50hz electrical setup mounting features termination inputs termination outputs mechanical parameters typical applications filter type b series general purpose rfi filters for high impedance load / low current ? general purpose ? wide variety of termination options ? meets low leakage current requirements of vde portable equipment and non-patient medical equipment 250 vac 1, 2, 3, 5, 10, 20 or 30a vb models: .4 ma / .7 ma eb models: .21 ma / .36 ma single stage screw mounting .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads wide band rfi suppression for applications requiring low attenuation including: ? h vac ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? battery charging systems ? exercise equipment k series general purpose 250 vac 1, 2, 3, 5, 10, 20, 30, 40 or 60a vk models: .5 ma / 1.0 ma ek models: .21 ma / .36 ma single stage screw mounting (fange or panel) .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut, wire leads or iec 60320-1 c14 or c20 .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads dk series 250 vac 1, 3, 6, 10 or 20a vdk models: .4 ma / .7 ma edk models: .22 ma / .38 ma dual stage screw mounting .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads universal flter for applications requiring improved attenuation including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? gaming machines ? exercise equipment ul / csa / vde general purpose rfi power line flters for high impedance loads ? well suited to applications where pulsed, continuous and/ or intermittent rfi interference is present ? ek models meet the very low leakage current requirements for vde portable equipment and non- patient care medical equipment ? available with ground line inductor (choke) ul / csa / vde enhanced diferential mode performance k series rfi line flters ? higher performance line to line attenuation than the k series ? e version meets the very low leakage current requirements for vde portable equipment and non- patient care medical equipment ? v version features same high performance with more cost-efective design ul / csa / vde power line filters universal flter for applications requiring mid-range attenuation including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? gaming machines ? exercise equipment ? test measurement equipment
corcom.com corcom filter products te connectivity r series two-stage general purpose rfi power line flter ? dual t section rfi flter provides premium performance ? well suited for low impedance loads where noisy rfi environments are present ? controls pulsed, continuous and/or intermittent interference ? er model ofers low leakage current without deterioration of insertion loss 250 vac 1, 2, 3, 5, 10 or 20a vr models: .4 ma / .7 ma er models: .21 ma / .36 ma single stage screw mounting (fange or panel) .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut, wire leads or iec 60320-1 c14 .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads ebp, edp, eop series general purpose 250 vac 1, 3, 6 or 10a edp/eop models: .22 ma / .38 ma ebp models: .13 ma / .21 ma single stage pc board pins pcb pins .025 [ .635 ] square pcb pins .025 [ .635 ] square designed for pcb mounting for a wide range of applications including: ? gaming machines ? cash terminals ? ofce equipment ? small consumer electronics ? tv / audio / video ? computing & accessories wg series wide range performance 250 vac 16a a, b & c models: .76 ma / 1.27 ma d, e & f models: .10 ma / .20 ma single stage screw-in mounting stud .25 [6.3 ] spade terminals, wire leads or rast 5 header interface .25 [6.3 ] spade terminals, wire leads or rast 5 header interface specially designed for the white goods / appliance market. ofers wide band rfi suppression for many applications including: ? washing machines / dryers ? dishwashers ? refrigerators & freezers ? cofee machines ? hand held appliances & tools ? ovens & ranges ul / csa / vde pc board mountable general purpose rfi flters ? general purpose ? low leakage current ? cost-efective ? compact size ? edp model features enhanced diferential mode performance ? ebp model features compact size (less than 1 square) ul / csa / vde high performance, low cost flter ideal for appliance equipment ? cost efective ? tubular design ? wgd, wge and wgf versions designed to comply with leakage current requirements for appliances which may be easily moved from one place to another ? available in a variety of styles ul / csa / vde x, y & z series 250 vac 1, 2, 3, 4 or 6a .3 ma / .5 ma single stage screw mount or pc board pins .25 [6.3 ] spade terminals or pcb pins .065[ 1.65 ] diagonal .25 [6.3 ] spade terminals or pcb pins .065[ 1.65 ] diagonal rfi flter designed to bring most digital equipment (including those with switching power supplies) into compliance with en55022, level a or b and fcc part 15j, class b conducted emission limits. ideal for all applications with limited space including: ? switching power supplies ? industrial single phase applications chassis or pc board mountable power line filters for emission control ? compact chassis or pc board mountable ? three levels of performance ? complete fltering solution in minimal size ? x series for fcc part 15j, class b ? y series for en55022, level a ? z series for en55022, level b ? medical version available in the hz series ul / csa / vde power line filters (continued) universal flter for applications with low impedance loads including: ? motors ? semiconductor actuators ? home appliances ? gaming machines ? exercise equipment ? security systems ? industrial equipment & controls
corcom.com corcom filter products te connectivity series performance approvals features electrical parameters max. voltage current ratings leakage current each line to ground @ 120vac 60hz / 250vac 50hz electrical setup mounting features termination inputs termination outputs mechanical parameters typical applications filter type s, v & w series multipurpose power line rfi filter for emission control ? efective when used to control emissions in equipment using scr and t2l circuits ? s & w series designed for high impedance frequencies ? v series designed for low impedance frequencies ? medical version available in the mv series 250 vac 3, 6, 10, 20 & 60a (60a s series only) .4 ma / .7 ma (s series 3-10a) .75 ma / 1.25 ma (s series 60a) .5 ma / .82 ma (v & w series) .07 ma / .13 ma (mv series) dual stage screw mounting .25 [6.3 ] spade terminals or terminal bolt & nut .25 [6.3 ] spade terminals or terminal bolt & nut multipurpose power line rfi flter for emission control and high noise industrial environments and applications that require compliance with fcc part 15, subpart j and en55022, level a, down to 150khz including: ? consumer electronics ? small machine tools ? food service equipment ? measurement & instrumentation g & n series wide range performance 250 vac 6 & 10a .3 ma / .5 ma (eg models) 1.2 ma / 2.0 ma (vg & n models) single stage (6a models) dual stage (10a models) screw mounting .25 [6.3 ] spade terminals .25 [6.3 ] spade terminals specifcally designed for most digital electronic equipment requiring a high range of symmetric and asymmetric attenuation including: ? switching power supplies ? motor drives ? small machine tools ? industrial single-phase applications sb series 250 vac 6, 10, 20 & 30a .75 ma / 1.25 ma (vsb models) .22 ma / .36 ma (esb models) single stage screw mounting .25 [6.3 ] spade terminals or 8-32 terminal bolt & nut .25 [6.3 ] spade terminals or 8-32 terminal bolt & nut wide band rfi suppression for applications requiring enhanced performance including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? gaming machines ? exercise equipment ul / csa / vde high performance rfi filters for switching power supplies for increased fltering requirements ? designed to provide excellent attenuation for most digital electronics equipment and help comply with en55022 level a and fcc part 15j class b ? broad frequency range of performance from 20khz to 30mhz ? size and cost-efective solution ul / csa / vde high performance b series rfi line filters ? enhanced performance version of our popular b series of rfi line flters ? small size with enhanced performance ? 30a version half the size of other 30a flters ? low leakage version available ul / csa / vde power line filters (continued)
corcom.com corcom filter products te connectivity sk series high performance k series rfi line filters for smps emission control ? designed to reduce conducted noise to acceptable limits for equipment that must comply with fcc / en specifcations ? utilizes signifcantly higher element values than the general purpose k series ? esk6c and vsk6c incorporate separate ground circuit inductor rk series emc series ul / csa / vde high performance compact power line filter ? compact ? single stage ? signifcant diferential mode performance ? suitable for industrial machinery ? low input leakage current makes it suitable for portable equipment ul / csa / vde compact and cost-efective dual stage rfi power line filters ? compact dual stage flter series ? current rating up to 30a ? high diferential mode attenuation in the lower frequency range ? high common mode performance ? ideal for switching mode power supplies ul / csa / vde ik series wide range performance single and 2-phase rfi filters for industrial applications ? excellent performance for applications with high interference levels ? designed for single or two-phase applications ? available touch safe terminals provide easy connections and prevent inadvertent contact power line filters (continued) 250 vac 3, 6, 10, 20, 30 & 40a .4 ma / .7 ma (3-10a vsk models) .21 ma / .36 ma (3-10a esk models) .75 ma / 1.25 ma (3-10a vsk models) .3 ma / .5 ma (3-10a esk models) single stage screw mounting (fange or panel) .25 [6.3 ] spade terminals, terminal bolt & nut, wire leads or iec 60320-1 c14 .25 [6.3 ] spade terminals, terminal bolt & nut or wire leads universal flter for consumer electronic applications requiring a premium range of attenuation including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? industrial equipment & controls ? exercise equipment 250 vac 3, 6, 10, 15 & 20a .16 ma / .26 ma single stage screw mounting .25 [6.3 ] spade terminals .25 [6.3 ] spade terminals wide band rfi suppression for applications requiring high attenuation level including: ? consumer electronics ? industrial machinery equipment ? small machine tools ? home appliances ? power supplies 250 vac 3, 6, 10, 15, 20 & 30a .21 ma / .43 ma (3-10a models) .73 ma / 1.52 ma (15-30a models) dual stage screw mounting .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3 ] spade terminals, 8-32 terminal bolt & nut or wire leads wide band rfi suppression for applications requiring high attenuation levels including: ? consumer electronics ? single phase industrial equipment ? inverters ? switching power supplies 500 vac max. line to ground 1, 6, 16, 35, 50 & 80a .06 ma / 1.2 ma* (1 & 6a models) 1.7 ma / 3.2 ma* (16 - 50a models) 5.2 ma / 9.9 ma* (80a model) * 1a @ 289 vac, 16-80a @ 277 vac 50hz dual stage (6-80a models) dual stage + ground choke (1a only) screw mounting .25 [6.3 ] spade terminals or din type terminal block and bolt/nut .25 [6.3 ] spade terminals, wire leads or din type terminal block and bolt/nut wide band rfi flter for small to medium sized industrial equipment, power converters and variable speed motors. provides suppression of industrial 2-phase applications with high rfi emissions including: ? transportation vehicles ? site applications ? small construction machinery
corcom.com corcom filter products te connectivity series performance approvals features electrical parameters max. voltage current ratings leakage current each line to ground @ 120vac 60hz / 250vac 50hz electrical setup mounting features termination inputs termination outputs mechanical parameters typical applications filter type series fc series ep & vp series power line filters (continued) highest performance rfi filters for switching power supplies ? high attenuation for common and diferential mode interference ? efective from 10khz to 30mhz ? optimized for attenuation and size ? 3 or 6a versions available with iec inlet ? medical version available in the hq series 250 vac 3, 6 & 20a .73 ma / 1.27 ma (3 & 20a vq models) .22 ma / .38 ma (3 & 20a eq models) .29 ma / .51 ma (6a eq models) dual stage (medical versions without y-capacitors) screw mounting (fange or panel) .25 [6.3 ] spade terminals, wire leads or iec 60320-1 c14 .25 [6.3 ] spade terminals or wire leads trouble shooter for wide banded rfi suppression of applications with very high rfi emissions including: ? consumer electronics ? single phase industrial applications ? switching power supplies with transient currents ? h vac 250 vac 6 & 10a 3.9 ma / 7.0 ma (b sufx, single stage) 3.8 ma / 6.7 ma (no sufx, dual stage) single stage (b sufx) dual stage (no sufx) screw mounting din type terminals din type terminals wide band rfi suppression of industrial single phase applications with very high rfi emissions including: ? drives with long motor-cables ? variable speed motor drive applications * vde approvals for dual stage models up to 36a only 250 vac 3, 6, 7, 10, 12 & 20a .73 ma / 1.27 ma (vp models) .21 ma / .36 ma (ep models) dual stage screw mounting (fange or panel) .25 [6.3 ] spade terminals, wire leads, terminal bolt & nut, or iec 60320-1 c14 .25 [6.3 ] spade terminals, wire leads, or terminal bolt & nut wide band attenuation for applications with very high rfi emissions. this flter series ofers excellent attenuation for applications such as: ? consumer electronics ? single phase industrial applications ? drive motors and controllers ul / csa / vde single phase power line filter for frequency converters ? designed for frequency inverters and variable speed motor drives ? suitable for electronically noisy environments ? protects programmable logic controllers from rf noise on the ac power line ? touch safe terminals ul / csa / vde * dual stage rfi power line filters for switching mode power supplies ? dual stage flter ofers high insertion loss ? well suited for meeting cispr 22 a and fcc part 15j, class b ? ep model meets very low leakage current requirements ? 7 and 12a versions ofer optimum package size ul / csa / vde superior performance
corcom.com corcom filter products te connectivity t series superior performance a series da, db, dc and dcp series general & high purpose ffa, ffd, afc, afd series superior performance power line filters (continued) dc fltes feedthugh fltes high performance rfi power line filters for switching power supplies ? superior common-mode and premium diferential-mode attenuation ? smaller package sizes than the ep series ? et models with low leakage current ? medical versions available in the ht series ul / csa / vde high frequency power line filter or power entry module ? high common and diferential mode performance from 10khz to 1ghz ? available with an iec inlet, fuseholder and switch ? suitable for applications where computers are used to process secret or confdential information ul / csa dc flters available in a wide variety of versions for dc system rfi issues ? da series - compact rfi line filter with dc inlet connection ? db series - high current dc inlet filter and connectors ? dc series - general purpose line flters for dc applications up to 125vdc with many options ? p series - adaptable power entry module for dc rated applications ul / csa / vde ac & dc rated feedthrough flters and capacitors for highest rated performance ? ffa (ac rated) & ffd ( dc rated) feedthrough flters ? afc (ac rated) & afd (dc rated) feedthrough capacitors ? ofers high reliability & performance for high frequency applications ? custom versions available 250 vac 3, 6, 10, 15 & 20a .3 ma / .5 ma (et models) .75 ma / 1.2 ma (vt models) single (3-10a) & dual stage (10-20a) (medical versions without y-capacitors) screw mounting .25 [6.3 ] spade terminals, wire leads, terminal bolt & nut, or iec 60320-1 c14 .25 [6.3 ] spade terminals, wire leads, or terminal bolt & nut wide band attenuation for applications with very high rfi emissions including: ? consumer electronics ? single phase industrial applications ? drive motors and controllers ? commercial & building equipment 250 vac 3, 6, 10, 15 & 20a 1.2 ma / 2.3 ma (3a models) .7 ma / 1.2 ma (6a models) multi stage screw mounting (fange or panel) wire leads wire leads, or iec 60320-1 c14 ideal flter series for hardened applications where computers are used to process secret or confdential information. 125 vdc (da, db) & 80vdc (dc, p) 3, 6, 10 & 15a (da series) 60a (db series) , 3 & 6a (p series) 15, 30, 60, 100 & 125a (da series) screw mounting & snap-in spade terminals, pcb pins, wire leads, da or dcb connector, or terminal bolt & nut spade terminals, pcb pins, wire leads, da or dcb connector, or terminal bolt & nut ? network routing equipment ? servers ? switching equipment ? wireless cabinets ? ethernet hubs ? base stations ? repeater stations ? power supplies for all types of communications equipment 250 vac / 130 vdc 10 to 300a (ffa/afc/dfc) 10 to 200a (ffd) screw mounting screw terminal screw terminal universal applications including; ? servers and routers ? base stations ? transportation ? telecom ? mri rooms ? high current switch mode power supplies ? military and aerospace
corcom.com corcom filter products te connectivity series performance approvals features electrical parameters max. voltage current ratings leakage current each line to ground electrical setup mounting features termination inputs termination outputs mechanical parameters typical applications filter type ayo series aya series a series 3-phase filters compact low current 3-phase wye rfi filters ? for 3-phase, four wire, wye applications ? filters each of the three lines plus neutral ? good for attenuation beginning at 100khz ? space saving design ? low leakage current 440 vac phase to phase 250 vac phase to neutral / ground 3, 6, 10 & 20a 2.0 ma / 3.0 ma (3 - 10a models) 3.5 ma / 5.5 ma (20a models) @ 120 vac 60hz / 250 vac 50hz single stage screw mounting (fange or panel) .25 [6.3 ] spade terminals .25 [6.3 ] spade terminals wide band rfi suppression for general purpose 3-phase applications with low to middle rfi emissions including: ? vending machines ? food service equipment ? gaming machines ? small machine tools 440 vac phase to phase 250 vac phase to neutral / ground 16, 25, 36, 50, 63 & 100a 1.62 ma / 2.82 ma @ 120 vac 60hz / 250 vac 50hz single stage screw mounting (fange or inserts) terminal bolt & nut or din type terminals terminal bolt & nut or din type terminals universal flter series equipped with 2 diferent connecting versions including: ? uninterruptible power supplies ? industrial control systems ? machine tools 2 all models except 16aya10, 30aya10, 63aya6, 63aya6a and 100aya6a ul / csa / vde 3-phase wye rfi power line filters ? for 3-phase, four wire, wye applications ? cost-efective, universal 3-phase flters ? good attenuation over the complete frequency range of 10khz to 30mhz ? two diferent mounting styles available ul recognized2 high performance 3-phase rfi filters for wye applications ? common mode and diferential mode suppression from 50khz to 30mhz ? optional end bell kits available to shield input and output terminals ? ayp single stage for lower noise environments ? ayt dual stage provides highest performance ul / csa / vde 440 vac phase to phase 250 vac phase to neutral / ground 20, 30, 45 & 60a 1.4 ma / 3.4 ma @ 120 vac 60hz / 250 vac 50hz single stage (ayp models) & dual stage (ayt models) screw mounting (inserts) terminal bolt & nut terminal bolt & nut wide band rfi suppression for industrial 3-phase applications with high noise emissions (ayp models) and lower noise emissions (aty models) including: ? large machine tools ? customer machinery ? input flter for motor drives wide range performance general & high purpose
corcom.com corcom filter products te connectivity fcd series ayc series adt series 3-phase filters (continued) superior performance 3-phase delta external power line filter for frequency converters ? very high attenuation & high insertion loss ? bs models optimized for very high insertion loss ? bs models suitable for infeed/ regenerative (er) applications ? touch safe terminals provide easy connections and prevent inadvertent contact for safety ul recognized 3-phase wye rfi power line filters for high noise applications ? for 3-phase, four wire, wye applications ? very high attenuation with low leakage current ? ideal for emc troubleshooting and refurbishing in the feld ? touch safe terminals provide easy connections and prevent inadvertent contact for safety ul recognized3 high performance high current 3-phase delta rfi filters ? designed for very high insertion loss for delta three phase, three wire applications ? available with common or diferential mode coils ul recognized 480 vac phase to phase 277 vac phase to neutral / ground 6 to 230a varies from .26 ma/v for 6a model to 3.25 ma/v for fcd10bs models refer to catalog or website for full ratings voltage drop to virtual n to pe/v single stage (b sufx models) & dual stage (blank sufx models) screw mounting (fange) din type terminals din type terminals wide band rfi suppression for industrial 3-phase applications with very high rfi emissions including: ? machine tools ? elevators & escalators ? frequency converters ? industrial cabinets 480 vac phase to phase 277 vac phase to neutral / ground 16 to 200a varies from 62 / 106 ma/v for 16a to 111 / 192 ma/v for 200a model refer to catalog or website for full ratings @ 120 vac 60hz / 277 vac 50hz single stage screw mounting (fange) din type terminals din type terminals wide band rfi suppression for wye applications with very high rfi emissions including: ? frequency converters with very long motor cables ? machine tools 2 all models except 200ayc10b 480 vac phase to phase 277 vac phase to neutral / ground 63, 100, 160 & 200a 1.3a (adt6) 2.6a (63adt6s) 4.6a (100, 160, 200adt6s) @ 277vac 60hz single stage with feedthrough capacitors screw mounting (fange) terminal bolt & nut terminal bolt & nut ideal for industrial 3-phase applications with extremely high noise emissions including; ? high current motor drives ? spot-welding machines ? any difcult application with very difcult noise suppression bcf series compact 3-phase delta rfi filters for universal applications ? compact, light weight book-form design ? insulated, high quality safety terminals for input and output ? good common and diferential mode performance below 100khz ? touch safe terminals provide easy connections and prevent inadvertent contact for safety ul & vde 480 vac phase to phase 277 vac phase to neutral / ground 7 to 130a 30 ma @ 277 vac 50hz single stage screw mounting (fange) din type terminals din type terminals specially suited for regeneration systems of returning power. wide banded rfi suppression for industrial 3-phase applications with very high rfi emissions including: ? 3-phase inverters & converters ? variable speed motor drives ? process automation equipment ? elevators & escalators ? machine tools
corcom.com corcom filter products te connectivity series performance approvals features electrical parameters max. voltage current ratings leakage current each line to ground @ 120vac 60hz / 250vac 50hz electrical setup mounting features termination inputs termination outputs mechanical parameters typical applications filter type srb series eej series c series power entry modules general purpose 250 vac 15a* varies by model from .2 a to .24ma refer to catalog or website for full ratings capacitive, 8 options available values from 33pf to 3300pf screw and snap-in mounting iec 60320-1 c14 .25 [6.3 ] spade terminals, wire leads or pc board pins 250 vac 1 to 20a eej/ejs models: .22 ma / .38 ma ejh models: 2 a / 5 a ejm models: .01 ma / .017 ma single stage screw and snap-in mounting iec 60320-1 c14 or c20 .25 [6.3 ] spade terminals, wire leads or pc board pins wide band rfi suppression for a wide range of applications including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? gaming machines ? exercise equipment ? appliances minimum depth, cost-efective shielded power inlet filter ? wide range of capacitor values ? attenuates coupled emi up to 300mhz ? minimal to low leakage current versions are suitable for patient and non-patient contact medical equipment. ? full range of mounting and termination options including unique vertical and horizontal orientation slide in mounts eliminate the need for mounting hardware ul / csa / vde* cost-efective medium performance power inlet filter including the ejh/ejhs, ejm/ejms and ejs models ? enhanced two element circuit provides medium attenuation to 30mhz ? ejh & ejhs models feature minimal leakage current suitable for patient contact medical applications ? ejm & ejms models feature low leakage current, suitable for most medical applications ? ejs models feature eej performance in snap-in mounting ul / csa / vde power entry module with switch ? two function power entry module combining a dpst switch and an iec 60320-1 inlet ? snapCin or fange mounting ? available with or without a shielded general purpose or medical grade flter ? two element circuit provides enhanced emi attenuation ? reduce oem wiring time with optional preCconnected line and switch terminals 250 vac 1, 3, 6, 10 or 15a* f models: .25 ma / .40 ma h & non-fltered models: 2 a / 5 a single stage & unfltered screw and snap-in mounting iec 60320-1 c14 .187 [ 4.8 ] spade terminals (non-fltered) or .25 [6.3 ] spade terminals (filtered) available with or without pre-connected switch terminals ul / csa / vde* wide band rfi suppression for any application with very limited space for the suppression unit including: ? tv / audio / video ? computing & accessories ? home appliances ? consumer electronics *15a versions are tested by ul to us and canadian requirements and are vde approved at 10a wide band rfi suppression for applications with limited space including: ? tv / audio / video ? computing & pc powers supplies ? network & cabeling systems ? medical equipment *15a versions are tested by ul to us and canadian requirements and are vde approved at 10a wide ange performance
corcom.com corcom filter products te connectivity cu series p series ejt series power entry modules (continued) general purpose 250 vac 1, 3, 6, 10 or 15a* filtered models: .25 ma / .40 ma non-fltered models: 2 a / 5 a single stage & unfltered screw and snap-in mounting iec 60320-1 c14 .187 [ 4.8 ] spade terminals available with or without pre-connected switch terminals specially designed for 1u height equipment racks and can be used in space limited applications including: ? telecom ? computing ? tv / audio / video ? consumer electronics *15a versions are tested by ul to us and canadian requirements and are vde approved at 10a superior performance 250 vac 3, 6 & 10a filtered, 10a non-fltered h & l models: 2 a / 5 a s & z models: .25 ma / .50 ma single stage screw and snap-in mounting iec 60320-1 c14 .187 [ 4.8 ] spade terminals (standard) or .25 [6.3 ] spade terminals (l & z) available with or without interconnection block for unfltered versions wide band rfi suppression in over 8000 confgurations for a wide range of applications including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? gaming equipment ? fitness equipment ? h vac compact 1u height switched power entry module ? designed for popular 1u (1 ?) height rack mounted equipment ? two function power entry module combining a spst switch and an iec 60320-1 inlet ? snapCin, fange and fush mounting ? reduce oem wiring time with optional preCconnected line and switch terminals ul / csa / vde* versatile power entry module with small footprint ? snap-in or fange mounting ? standard iec 60321-1 c14 power inlet ? both north american and metric fusing capabilities ? two voltage selection options ? optional dpst on/of switch ? filter options for general purpose, medical and high-performance emi fltering ul / csa / vde 250 vac 1, 3, 6, 10 or 15a .21 ma / .36 ma dual stage screw and snap-in mounting iec 60320-1 c14 or c20 .25 [6.3 ] spade terminals or wire leads specially designer to attenuate noise in the high frequency range up to 1ghz for various electronic applications including: ? plasma & lcd tvs ? computing & accessories ? instrumentation & measurement *15a versions are tested by ul to us and canadian requirements and are vde approved at 10a high performance power inlet filter ? superior emi flter with iec 60320-1 inlet ? double three element diferential mode circuit attenuates noise up to 1ghz ? up to 15a with iec 60320-1 c14 ? 20a rating with iec 60320-1 c20 ? spade terminals or wire leads ul / csa / vde* gg & hg series 250 vac 1, 3, 6 & 10a hg models: 2 a / 5 a gg models: .25 ma / .42 ma single stage (medical versions without y-capacitors) screw and snap-in mounting iec 60320-1 c14 .25 [6.3 ] spade terminals or wire leads wide band rfi suppression for applications with very limited space including: ? tv / audio / video ? computing & accessories ? home appliances ? medical equipment ? gaming equipment ? fitness equipment smallest power entry module with metric fuse holders ? single or dual fusing ? two element circuit provides basic attenuation ? available with an internal ground- circuit inductor (c versions) to isolate equipment chassis from power line ground at radio frequencies ? multiple termination and mounting styles ? medical version as the hg series identical to gg with dual fuse only ul / csa / vde
te.com ? 2011 tyco electronics corporation, a te connectivity ltd. company. all rights reserved. 1-1654250-1 cis jg 08/2011 corcom, te connectivity and the te connectivity (logo) are trademarks. other logos, product and/or company names might be trademarks of their respective owners. while te has made every reasonable effort to ensure the accuracy of the information in this fyer, te does not guarantee that it is error-free, nor does te make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. te reserves the right to make any adjustments to the information contained herein at any time without notice. te expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or ftness for a particular purpose. the dimensions in this fyer are for reference purposes only and are subject to change without notice. specifcations are subject to change without notice. consult te for the latest dimensions and design specifcations. for more information corcom.com te technical support center internet: t e.com/help usa: +1 (800) 5 22-6752 canada: +1 (905) 4 75-6222 mexico +5 2 (0) 55-1106-0800 latin/s. america: +54 (0) 11-4 733-2200 germany: +4 9 (0) 6251-133-1999 uk: +44 (0) 800-26 7666 france: +33 (0) 1- 3420-8686 netherlands: +31 (0) 7 3-6246-999 china: +86 (0) 400-820-60 15 part numbers in this brochure are rohs compliant*, unless marked otherwise. *as defned www.te.com/leadfree

▲Up To Search▲

Price & Availability of 1EGG1C-1

	To Download 1EGG1C-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .